Frage von cocoloco:
Hi All,
Since I switched of DV to HDV (SonyHC-1) and have now synonymous Adobe Premiere Pro 2.0 and Encore DVD 2.0, using, I have a strong "line-education" or jerky when I look at the created s.DVD DVD Player / Recorder . I have now done several hours in the smart Forum and then I pushed Relating to interlaced or deinterlaced. My Cam (just the HC-1) indeed stands at 1080i with 25fps on (ie, interlaced). Exporting in Premiere gibts ja now at the possibility of lead fields together. I have also tried, but unfortunately this has led to only moderate improvement. I have also experimented s.der bit rate (VBR 2-pass, 4mbit as synonymous 7mbit CBR 1-pass, etc.).
It is astonishing synonymous, that I have this line formation synonymous when playing in VLC player. If I could, however, activate the filter for deinterlacing, then I have these lines any more. What should I do now, so I've created DVD does not synonymous to the line more. How should I export an HDV Project to import it into Encore to be followed. Do I have to then render again in Encore? Where does this line of education?
Thank you for your tips
Patrick
Antwort von grovel:
Your contribution allows us to conclude that the lines are synonymous to the television (when of DVD playing). This would be very strange and hard to understand.
Everything else about the "lines" can be found on http://www.100fps.com
Or with a bit of research here in the forum.
And just to say it again for the thousandth time. The "lines" are not an error but a feature! So let your material interlaced and everything is wonderful.
SeeYa grovel
Antwort von cocoloco:
Hello grovel
A thousand thanks for your answer! When I import the movie and capture (but is called so when I receiveth of Cam in Premiere, or), then that's still interlaced. After I finished the film cut and processed with effects, I export them to Adobe Media Encoder. Where should / can I now determine whether the film is to be rendered interlaced or not? Is that the "lead fields together?
Thanks again and warm greetings from Switzerland,
Patrick
Antwort von Olli:
Nee,
Merge fields you make your film Progressive. So to full-screen images.
You must select fields, and then I think on the lower field first. (As synonymous, but I'm not sure, yes Are preferences)
Antwort von cocoloco:
The default value for the order is "Upper field first". This attitude, I can not synonymous with capturing pretend. I have now exported to the Project (see Attachment bild1.jpg settings) and then a m2t. Get file.
Moreover, even now needs to. M2t file to be burned to DVD somehow. I made with Roxio Easy Media Creator 8th The resulting DVD is created on-line education unusable.
Surely it should be humanly possible, that I cut of my HC-1 can import it into Premiere, the movie, set to music, etc. And then in HD quality (1080x1440)'s back on tape and can output in PAL Resolutionin 16:9 on DVD without that I have these lines?
Thank's for feedback ....
Patrick
Antwort von WeiZen:
Moin,
M2t you want one? then please leave synonymous with 25Mbit, not even 4Mbit or 8Mbit. The latter are suitable for SD DVD, HDV is about 5 times larger. What you see there are compression artifacts.
If you would like to have a Video DVD, as convert it to an anamorphic 16:9 SD Mpeg with 720x576, vodeo just DVD.
Antwort von BjörnF:
Hi,
I recently had little problems synonymous with HDV output (1080i) on normal DVD. No matter what field order (top or bottom) - movement looked jerky. ICh habs me so declares the premiere at the Export and Resize of 1440x1080 on PAL format somehow get problems hinzukkriegen the fields clever, because yes, "must be re-set" and will not be covered by the source material.
The best result was easy with a progressive export. By Resize of HDV to PAL DVD gabs synonymous no problems with the deinterlacing.
Björn
Antwort von cocoloco:
I again .....
s.Ulrich have a question ... which I can then convert it to 720x576 anamorphic 16:9 SD MPEG? Do you mean the export settings in Premiere? MPEG2-DVD PAL DV 16:9, 720x576, VBR 2-Pass? If so, just so that I've given this line of education or compression artifacts.
Thanks, and Gruss,
Patrick
Antwort von WeiZen:
Moin,
I use Edius with the contained Procoder Express.
Export settings in Premiere? MPEG2-DVD PAL DV 16:9, 720x576, VBR 2-Pass? So the attached picture was not 720x576, sobdern 1440x1080
Antwort von cocoloco:
At last it worked .... The lines are gone and the quality of the DVD is synonymous good! I proceeded as follows:
1. Capturing with premiere of the film (Preset HDV recording)
2. Subsequently, in accordance Premiere (sound, titles, etc.) handled
3. Exporting from Premiere (Format: MPEG2, PAL 720x576, field order: Top, widescreen 16:9 (1,422) constant bit rate 8000 Mbit / s)
've Then still synonymous with format: MPEG2-DVD and variable bit rate (min. 1.500, target 4000 and max. 7,000) exported. I receive the same quality as with CBR and I can see no difference?
Thirdly, I have directly exported's on tape. In no compression was performed and I have the edited material back to full HDV quality.
Again, many thanks for all the contributions!
Patrick
Antwort von alvaro:
Patrick
could you the edited HDV footage replay of the timeline without rendering, or with the Camera?
Namely, I would be interested in
whether it goes without rendering.
For me was a powerful experience,
When I first HDV footage was in the same wonderful quality of the camera!
mfG, alvaro
Antwort von cocoloco:
Hi Alvaro,
Replay was "unfortunately" only render with ....
Cordial greetings
Patrick
Antwort von Olli_der_2.:
At last it worked .... The lines are gone and the quality of the DVD is synonymous good! I proceeded as follows:
1. Capturing with premiere of the film (Preset HDV recording)
2. Subsequently, in accordance Premiere (sound, titles, etc.) handled
3. Exporting from Premiere (Format: MPEG2, PAL 720x576, field order: Top, widescreen 16:9 (1,422) constant bit rate 8000 Mbit / s)
've Then still synonymous with format: MPEG2-DVD and variable bit rate (min. 1.500, target 4000 and max. 7,000) exported. I receive the same quality as with CBR and I can see no difference?
Thirdly, I have directly exported's on tape. In no compression was performed and I have the edited material back to full HDV quality.
Again, many thanks for all the contributions!
Patrick And what was different now s.den settings as before?
I now have one synonymous interesantes result.
The DVD plays properly on my DVD player and s.PC with tubes Television. I exported 720x576 anamorphic 16:9 progressive.
If, however, viewed the DVD on another player with plasma screen, there is a flicker. It looks almost as if the DVD player or the television trying to make fields. Are any devices but at a setting. If yes synonymous car go.
Antwort von Mr Jo:
Hi guys,
have recently, the HC3 (supposedly the successor model) and get the output to tape with APP 2.0 not baked ..
How did you do that exactly how funzt the replay of a cut film on HDV tape?
Am grateful for all the answers.
Greeting Mr Jo
