Frage von cars1111:
it may be that the good FX7 has no standby mode? of the V1, I know that after a short time off and saves battery .. annoying for some people, this is quite important for me because I use the camera in a water housing and does not wish to put on stand-by may forgo ...
one could possibly V1 firmware on the FX7 to play, then yes they would have a stand by? thank you for your tips ...
Antwort von seedee701:
Caution with the water housing "- the Cam tolerates but no water ... ;-)
Antwort von cars1111:
Caution with the water housing "- the Cam tolerates but no water ... ;-) so yes in case .... berger du clever ...
None knows honest here NEN good tip?
Antwort von christian_hh:
'nen good tip I, unfortunately, not synonymous. I can only confirm that I am still not synonymous standby place. Since I only s.Land am, it still does not disturb me.
Antwort von Schlauberger :-):
Caution with the water housing "- the Cam tolerates but no water ... ;-)
so yes in case .... berger du clever ...
None knows honest here NEN good tip? Thank you for the "smart aleck, but it should be correctly" waterproof housing "or" underwater housing "hot - ask what is a" water housing "?
Even as a tip: I do not know any "underwater filmmaker" of his cam in the housing in the "Stand By" mode operates.
Have you ever been filmed underwater?
Fish do not wait!
You purchase a "decent" housing, because you have the possibility of using Lanc, the whole Cam and one off.
For the dive, or on the (underwater-) path to the location is okay - but if you're s.Ziel, the standby function is superfluous.
If a proper enclosure does not fit into your budget, you buy a larger battery - will be much longer than you air in the bottle did. (Have just geguckt - with a Battery NP F 750 I 268 minutes duration with extended display)
... btw: your shift button is broken ...
Antwort von carste1111:
Caution with the water housing "- the Cam tolerates but no water ... ;-)
so yes in case .... berger du clever ...
None knows honest here NEN good tip?
Thank you for the "smart aleck, but it should be correctly" waterproof housing "or" underwater housing "hot - ask what is a" water housing "?
Even as a tip: I do not know any "underwater filmmaker" of his cam in the housing in the "Stand By" mode operates.
Have you ever been filmed underwater?
Fish do not wait!
You purchase a "decent" housing, because you have the possibility of using Lanc, the whole Cam and one off.
For the dive, or on the (underwater-) path to the location is okay - but if you're s.Ziel, the standby function is superfluous.
If a proper enclosure does not fit into your budget, you buy a larger battery - will be much longer than you air in the bottle did. (Have just geguckt - with a Battery NP F 750 I 268 minutes duration with extended display)
... btw: your shift button is broken ... because here are all completely overexcited or why there is no vernünfitigen reply in this forum? I have a normal question and will be taught here, that my shift key is broken or, as the case I have to call! gehts noch??
I go with the camera does not appear, but movies s.der water surface du berger sly nr 2 and I also have enough money, but there is no decent (this is just about the weight!) housing under-uh-than-watertight housing !
in the rest of the movies I fp 970 and it's not about me, that my time in the water is not sufficient, but that I simply poor think that the big brother v1 standby function has this and when someone apparently fx 7 s . wrong end functions saving!
Please spare me with tips to my "case" I just want to know whether the standby function nächträglich can activate!
Thank you!
Antwort von Markus:
because here are all completely overexcited or why there is no vernünfitigen reply in this forum? Unfortunately, it is that so many users with special preference to formulate questions and then falls within that thread often s.eigentlichen topic vorbeidiskutiert. Do not be angry. If it takes the upper hand, I store inappropriate postings in the category "off topic" from.
it may be that the good FX7 has no standby mode? Unfortunately I can not say anything, otherwise I would have done it long ago. ;-)
_________________
Sincerely,
by moderator
Antwort von Zizi:
In what is a housing for your cam?
And why is it important to stand by if it does not save battery goes dead?
As next above written - usually the motive is faster than your cam away from the Stand By is back. For "street shooting" with a lot of time in preparation and well-defined rotation periods may be - but there it is then possible synonymous throughout the cam off.
Antwort von B.DeKid:
Gude
The jungle of the firmware could adversely affect the functions of a camera effect.
So this is not recommended or not feasible.
If it is not lacking s.Money (normally I would say "Donation Account 444, I'm poorer than you"), then buy 2 extra batteries and a solar charging station (solar charging devices for gibts GLOBETROTTER de Battery charging device and the RC dealers combined, there is a nice solution OffRoad)
The recommendation with the LANC, I can only agree with this would be worthwhile synonymous ...... although I see no sense in it if the battery with over 200 minutes of juice has ....
Hope this was not too stupid for you
Alla wünsch what
MfG
B. DeKid
Antwort von Markus:
Here I have a posting wegsortiert because the information content rather thin and the bad mood was more apparent.
Who's interested in:
Antwort von cars1111:
@ Markus,
thanks for the Filter! Since the town clearly s.vielen things bother, I will add my shift button and use ... what now, however, with the question has to do .....? perhaps synonymous only German Ordnungwahn!
@ B. DeKid:
The jungle of the firmware could adversely affect the functions of a camera effect.
So this is not recommended or not feasible.
Do you know or is it a guess?
On the subject LANC:
I am building for many years, my housing (surface casing) and even have my good reasons why I can not use electronics and I have no underwater housing "buy!
To say it again now ALL I need to clarify a standby mode because
1. the camera in the housing is heated strongly and the problems with large temperature differences can lead (Theme condensation)
2. care is in my pictures that I synonymous times 45min-1 hours to wait! Who ever in 5 m Indonesienwellen to a surfer waiting for a wave surfing, I confirm!
Why a Battery torture if it may be synonymous schohnend treat!?
So I have all the reasons for my posting here will be disclosed and that no further attention!
Also saves you your comments!
@ Markus / Moderator:
Thanks again for your comments and material for sorting!
Antwort von Markus:
On the note of B. DeKid perhaps some background information: About the Lanc-interface of a Sony camcorder, you can gain access to the operating system and in the firmware herumhacken. Most recently, the possibility of interest, when DV camcorder could still unlock.
At that time there were different solutions for the firmware change, such a gadget, which makes self-reprogramming (connect to a button, get ready) and therefore it was foolproof. Or a most effective solution for professional users, where you access from your PC to the firmware of the camera and then gets even programmed. The fact that the latter was not without risks, is expected to clear to everyone, because without working firmware, the camcorder to a case for the service.
With a PC-based DV Freischaltungskit should therefore be possible to influence the firmware to take and if the programmer knows what he's doing, I think it is possible to stand-by function to a button too, so that this mode Lanc without additional controls can be activated.
As I said, this is a process that requires adequate knowledge.
Antwort von Schlauberger:
Well at least now I understand the reason for the question ;-) - although I can not attest to the fact that an FX 7 in (bought) heated underwater housing so that the port shoes ... otherwise there would be so enormous problems with (right) underwater shots, because surfers have to dive down there major differences in temperature - so test 'times your design and consider possible but in a professional cabinet to invest. . .
And when times but problems are expected to stick with a little TESA film such a bag with silica into the housing (with an FX 7 of course, not the young Chen bags from the shoe shop :-)).
Nevertheless, I desire to standby not understand, because of you in the situation described, it is important to the Cam constantly under steam to have, because if you do not switch fast enough s.StandBy are, you might wait another one hour. ..
In a poster which I have from the (shifted) to contribute but agree: it reads much easier and is somehow synonymous polite, if you look at a correct spelling (including upper and lower case) tried.
Antwort von cars1111:
There will be no comment, no further explanation given. Big word of honor!
(Schade, where the FX7 but even with different "go to sleep" - can provide hours ...) why you write that, but not where you wanted to comment ?????
I do not understand, you could make a useful contribution to deliver (perhaps even myself or help others) and then .... this! I tell me thank you!
perhaps I would have some extra for it to be formulated:
-Saves your comments please, nothing with the actual thing to do!
.. I always thought this is a forum where users help other users and not with endless teachings distract from the real issue ...
I would stand s.meiner FX 7 and if someone will still have another tip, please let him hear! why not, why and why it just so ...
.. the tip with Lanc is very good! again thank you Mark!
I will use the Lanc "master" question .. (www.hgvt.de) what he says .. the program and are supernett everything myself ...
Antwort von Markus:
Since the town clearly s.vielen things bother ... The troublemaker whose posting I've sorted out again, do not represent the community. ;-)
See here:
Normal tone here?
